The Copic Airbrush System

Today we are looking at the Copic Airbrush system or ABS for short.  The Copic ABS (Airbrush System) allows you to use your Copic Sketch or Original markers in new and exciting ways and provides an easy and relatively inexpensive way take your Copic art to the next level!

Materials:

• Copic Airbrush System
• Compressor
• Copic Markers
• X-Press Graph-X Stencil Sheets

The Copic ABS is extremely simple to use, just attach the Airgrip to the Aircan (or compressor), insert the chisel tip of your Copic Original or Sketch marker into the Airgrip and press the trigger to deliver a steady and even colour across porous or non-porous surfaces!  To change colours just swap one marker for another.  Why do you need an ABS or compressor - well to create beautiful even backgrounds, graded colours, amazing blends and it actually uses LESS ink than normal colouring!

If you are new to airbrushing then Copic has several starter kits available, ABS1-N, ABS-2, ABS-3 - more information is available on the Copic ABS flyer.  I'd recommend the COPIC Marker Airbrush Kit #1 – as this versatile kit includes: Airgrip, Air Can 180 (about 45 mins of air time),  Air Adapter, Air hose, and a handy can holder. Everything you need to create airbrush art with your COPIC markers! This  kit also has everything you need if you decide you LOVE airbrushing and want to upgrade to an air compressor in the future (which is why I'd recommend this particular kit). Though you will need to make sure your new compressor comes with a hose, as the air hose included in this kit isn't suitable.




Here are a few quick exercises to help you better use your new Copic ABS system, whether you are using an Aircan or a compressor.

Make sure your marker nib is not pushed too far in or too far out.

Spray Close to the Card 3-4cm - from left to right quickly, fast = light

Spray Close to the Card  3-4cm - from left to right slowly, slow = darker

Spray At a Distance (15cm) from the Card = a finer spray

The trigger is pressure sensitive and will create different effects according to the pressure used.

Give it a try - press trigger down 1/2 way = lighter colour

press all the way down = darker colour

The ABS is pure magic when used with Stencils or Masks.  I've created this using  X-Press Graph-X Stencil Sheets (these have an adhesive backing so give a super crisp result).  Spray your ink from a distance, moving slowly back and forth over the card to achieve a smooth and even result.

HOT TIPS:

1. Airbrushing uses LESS ink than direct colouring since saturating the paper isn't necessary.
2. Don't shake or lay aircans on their side while in use.
3. If your aircan gets too cold (happens after about 90 seconds spraying) then your spray may become splotchy or the airflow may be reduced.  Just wait for a minute or so, until your air can warms back up!
4. Begin by starting with a light spray.......... you can always add more colour, but you can't take it off
5. If your project begins to feel tacky you have added too much ink (this will happen more quickly on non-porous surfaces).  To combat the tacky feeling, carefully spray your project with a fixative - make sure it's non-alcohol based or the fixative will react with your Copic ink!
6. Ensure your marker is aligned vertically with the nozzle - if it's off to one-side or the other your spray pattern will be off.

Have fun using your Copic ABS system, though fair warning it's rather addictive!

Back next month with more,
Kate

Pin It

Mail Art Made Easy with Copics

Hello gorgeous Copic Oz fans, today I'm going to show you how to create a beautiful piece of mail art that's almost too pretty to send!  This is a great way to create custom envelopes and really impress your postie, plus it's a simple way to reuse some of your own art to make something new.  If you don't want to make your own, there are an amazing array of beautiful stencils and masks on the market these days and this technique is versatile enough to look amazing with most of them.

You Will Need:

• Copic markers:  Y06, BV11, B02, BG05 & RV06
• Copic Various Ink: Colorless Blender
• Copic Multi Liners: 0.3 & 0.5
• AtYou Spica: Turquoise, Clear and Pink
• Fab Scraps Stencil: Stars
• X-Press It: Blending Card and Mask It film
• Mini Mister bottle filled with Colorless Blender
• Black acrylic paint or gesso

Instructions

You can watch this being created on our YouTube channel or follow the instructions below.

Step 1: Gather some bright colour Copic markers, your favourite paper and Mask It film.
Fold card to create envelope.

Step 2: Cut a speech bubble shape out of Mask It film and adhere to envelope.

Step 3: Using an Airbrush add BV11

Step 4: Add Y06

Step 5: Then add B02

Step 6: Add RV06

Step 7: Finally add BG05 to cover any remaining white areas.

Step 8: Lay star stencil over envelope and spritz with Colorless Blender, allow to dry.

Step 9: Draw design onto Mask It film (if drawing your own design make sure to

REVERSE it so your design turns out the correct way), cut out and apply to envelope.

Paint over envelope with black gesso or acrylic paint.

Step 10: Allow paint to dry for approximately 2 minutes and then carefully remove mask.

You will notice there are a few areas that need a little smoothing or filling in.

Step 11:  Use Copic Multi Liners and Spica pens to fill in gaps, decorate and address envelope.

Once all the edges are smoothed and a little extra colour added, your unique mail art envelope is complete and will look something like this.

I'd love to see if you create any mail art with your Copic markers, please share your art on the Copic Australia Facebook page.

Back with more soon,
Kate

Pin It

A Very Copic Christmas

Hi Kate here and this month I'll be showing you two very quick and simple Christmas projects that you can complete in under 30 minutes - yes that's both in under 30 mins with the help of a Copic ABS (Air Brush System).

The first project is some Copic decorated wrapping paper, this is a wonderful way to re-use the brown or plain paper that you receive during the year, wrapped around other items.  The same technique will work on paper, tissue and even cellophane - so save all that wrapping and create your own Copic coloured decorator papers.

For this project you will need:

• Copic Sketch Markers in coordinating colours (I used: B79, RV66  & BG57)
• Copic Air Brush System
• Stencil or template (I used a punched snowflake)
• Recycled paper, tissue or cellophane
• Length of white ribbon

Begin by laying the stencil flat onto your paper and lightly spraying on the first colour (RV66) with the airbrush.  Move the stencil around, creating as many little Raspberry snowflakes as you like.

At this point you can continue to use the snowflake with the next colour (BG57) or you can use a different shape stencil for some variation.  Add as many Jasper (Blue Green) snowflakes as you like - just remember to leave some room for the 3rd colour.

Time to add the final colour, now B79 'Iris' is one of the stronger Copic colours, so spray this lightly and I didn't add as many snowflakes of this colour to my project, so as not to overwhelm the other colours.  Once finished adding snowflakes, put your paper aside to dry - this won't take long!

Now you don't HAVE to colour the ribbon to match - I just thought it was a cute accent.  For those of you who have coloured ribbon with your Copic Markers before you will know how long this can take and how much ink is used.  Well I'm happy to report that not only does colouring ribbon with the Copic ABS use much less ink, it's also loads faster and the results are beautiful!  All I've done here is airbrush the B79 onto the ribbon, I've added more ink to one side than the other so I will get a two-toned effect to the ribbon when I tie it.

And here is my Copic decorated wrapping paper and ribbon, cute, customised and quick!

Things to note:

• When using small stencils like this one there will be some overspray (where the Copic ink sprays over the edge of the stencil onto your project), if you really don't want this, protect your project with scrap paper as you spray.  I didn't as I like the extra patterns it adds to the final piece.

For my second project I'm creating something slightly fancier - a stunning custom Christmas bauble. This really isn't as difficult as you may think - just don't drop it!

For this project you will need:

• Copic Sketch Markers in coordinating colours (I used: B79, RV66  & BG57)
• Copic Air Brush System
• Snowflake Die
• Mask It - masking film
• Clear glass or plastic bauble
• X-Press It Clear Gel Glue
• Silver Glitter
• Sticky tape and tissues

Begin by using your favourite die cutting system to cut some snowflakes from a sheet of Mask It film - this film has a sticky layer on one side making it a removable adhesive.  Today we won't be using the die cut shape, but rather the surrounds!   I cut 3 negative shapes to use - you may like to use more.

Remove the backing layer from the Mask it shapes and adhere the sticky negative shapes onto the bauble, you may need to cut them in 2 to fit onto the rounded surface - I also overlapped the pieces a little.  I then used sticky tape to attach some tissues to protect the rest of the bauble and keep it from being coloured.  Using my airbrush I have added a layer of BG57 as a base colour.

With the mask still in place add some of the RV66 - don't colour the whole thing, just add this to a few edges and maybe a little in the centre - remembering to leave space to add the 3rd and final colour.

Go ahead and add the last colour, I'm using a particularly dark colour B79 so am adding only a little!

Remove the tissue and repeat this whole colouring process, around the bauble until all of your die cut shapes have been coloured.

Remove the tissue and the Mask It and your project now looks something like this.  You might choose to leave it like this is you don't like glitter.

For my final step I have dribbled X-Press It Clear Gel Glue around the top of the bauble and let it drip down the sides a little - now this is very thick and needs some encouragement to drip.

While glue is still wet shake your favourite colour of glitter over the top and then hang somewhere safe and leave overnight to dry.  Once dry brush off any excess glitter and it's ready to use.

Wishing you all a very Merry Christmas (just a little early) and a wonderful new year...

Kate 

Pin It

Copic Journal Cover

Hi again - today's project has quite a few steps but the results make it completely worthwhile!  Now a few of you may be familiar with the work of amazing  Polish artist Anna Dabrowska - better known as Finnabair, well today I am taking inspiration from Finnabair's unique complex style and creating a cover for my new Copic Journal.

You will need to gather some materials to embellish your journal cover: metal, plastics, embellishments, papers, lace, charms, wood, chipboard - whatever you would like to incorporate onto your design.  I am using my X-Press It Blending Journal, a variety of lace, Chromacryl white acrylic paint, chipboard shapes from FabScraps and a variety of brass charms and paper flowers.

**Normally it is recommended that you apply your Copics first BEFORE paint, pencil or any other mediums, so they won't become clogged. Before you start, you do need to be aware that when using your Copic Markers on some surfaces you need to understand the nib may become blocked by repeated use over paint and you accept that you will need to periodically replace the nib. It is a good idea to have a few Copics that you use ONLY for mixed media work.**

Paint the journal cover with the white Chromacryl acrylic paint - I used 2 coats allowing each to dry before continuing.  Once dry use the fabulous TripleTac glue from X-Press It to adhere your embellishments to the journal cover - allow this to dry thoroughly before continuing.  

This is what mine looks like.

Once dry cover everything with white Chromacryl paint and leave to dry.  You can add a little texture paste for extra interest at this point if you like.

Spray with your favourite sparkly sprays and let dry (this saves a little Copic ink as it adds a base layer of colour, it also adds a little bit of sparkle to the final project).  

Using a Copic airbrush spray BG34 over your cover to colour any light/white areas.

Spray YG25 to about 1/4 of the cover - this can either be randomly or you can choose to colour individual elements.

Still using your airbrush, add V04 to a few places and colour some of the elements eg: flowers or bird - this adds a beautiful contrast to the greens and blues

Add BG49 to darken the colours.

Now this is where things get really interesting!  Using the special properties of Copics and the Copic Blender you can achieve some exciting special effects.  

Before adding any final colours, use a stencil and the X-Press It Clear Gel Glue to apply a design to some of the areas without embellishment.  I also used the Clear Gel Glue to cover some individual elements to highlight them, leave this for several hours or until completely dry.

This results in gorgeous shiny areas (keep reading to see why this is an important step).

Spray BG09 around the edges of the cover - darkening the edges draws your eye to the more colourful area in the centre.  Go ahead and use your airbrush to spray right over the top of the glue design.

Add E47 to the edges and to some of the central designs, again this helps draw the eye.

The final colour E49 is only sprayed on to the very edges, and to the central frame - go ahead and spray this well, getting into all the nooks and crannies.

Use the Copic Blender for the next steps - the special effects!

Using the blender brush tip, remove the excess colour from the top of the gel glue elements (make sure to scribble to colour off your blender in between) - this will reveal the original colour underneath which is paler, creating patterns which POP!

Then use the chisel nib to remove colour from the highest points of some of the textured embellishments eg: frame, bird etc, this will reveal the colour underneath and leave yummy darker colour around it (using this flat nib ensures you only touch the very top of the design - resulting in a beautiful colour contrast - just don't press too hard!).

As a final step flick a little of the Copic Various Blending ink onto your project (I add a few drips onto my fingers and just flick this on) - this will add just a little more texture and interest to the final piece.

 Once all the colour is dry and you have finished removing colour using the Blender your project will look something like this up close, aren't those colours amazing - the Copic ink even blends and layers over paint!

and this is what my finished journal cover looks like....

Products used on this project:

• Copic Markers: BG09, BG34, BG49, V04, YG25, E47, E49 and Colorless Blender
• Copic Air Compressor
• Copic Colorless Blender Various Ink
• X-Press It: Blending Journal, Clear Gel Glue and TripleTac Glue
• Chromacryl White Acrylic Paint
• FabScraps chipboard shapes, lace, watch parts and other embellishments (metal and acrylic)
• Optional - your favourite sparkly spray as a base - for a matt finish omit this

I just love the amazingly vibrant results achieved with the Copics on this project and the special effects achieved with the Blender make it just that bit more special.  I hope this inspires you to have a go at this technique for yourself, I can promise it is loads of fun and the results as you can see are fairly impressive.

I'd love to hear what you think of my journal cover,  I'd also love to see how you've decorated your Copic Journal covers so why not post a photo of your decorated X-Press It Blending Journal over on the Copic Australia Facebook page.

Kate

Pin It