Wednesday, April 17, 2013

Using Copic Markers to Create Stunning Coloured Flowers

Let me start this post by saying I take no responsibility for anyone ending up with a flower colouring addiction.  I'm warning you all these are fun, easy and give fabulous results!  So grab any paper flower and try one of these techniques today.
Please note each technique builds on the one preceding it, so there is some repetition of instructions.

These are the flowers we will be making

Flower #1 - Using 2 Copic Markers for a Realistic Coloured Flower

This technique creates a fabulous flower that looks quite realistic, I love using roses for this as you can really see the colour blends on the underside of the petals.

For this flower you will need:
  • Mulberry Paper Flower
  • 2 Copic Markers from a natural blending family
  • Colorless Blender Various Ink Refill
  • Heat Gun /Embossing Gun
Instructions:
Begin with a white or pale coloured paper flower and choose 2 colours of copic marker (I like to use colours that appear in my copic coloured image, from a natural blending family).   For this flower I have used RV63 & RV66.
Colour 1/2 of each petal with your lightest colour working from the outer edge in towards the flower centre - make sure not to colour the whole petal.
Using the darker colour, apply a thin strip of colour to the outer edge of each petal - I just run the side of my marker along the edge of the petals.
Your flower should look like this once finished applying colour from your Copic markers.  You will notice I've made no attempt to blend colours or be particularly neat here - this technique is very forgiving.
Uvs130414-001
The next step is to apply a few drops of Colorless Blender to each petal - add the liquid to the outer edge of each petal - the fluid will wick towards the flower centre and drag a little colour along with it.
 Dry the flower with a heat gun / embossing gun - this will take up to 45 seconds depending on how wet the flower is.
Uvs130414-001
Drying with the heat gun will not only dry the liquid but it also results in discoloured edges to the petals (they darken considerably) giving a beautiful result.
You can watch this flower being created here:

 

Flower #2 - Using 3 Copic Markers to Create a Fantasy Flower

This flower uses 3 colours from different families and adds in a little bling to create a stunning fantasy flower.  This technique really works well on flatter flowers like the gardenia I used here, and though I have used a mulberry paper flower you can use this same technique on fabric flowers also - it looks amazing on satin, though your colours will turn out much lighter! 

For this flower you will need:
  • Mulberry Paper Flower  - I like using gardenias for this
  • 3 Copic Markers from across colour families (I used: V09, RV09 & YR09)
  • Colorless Blender Various Ink Refill
  • Stickles Glitter Glue - I used the colour Diamond
  • Heat Gun /Embossing Gun
Instructions:
Begin with a white or light coloured paper flower (I like gardenias because they are easy to colour). Choose 3 colours of copic marker (this works to best effect if you choose 3 colours each from a different colour family - though can use a natural blending family as well if you like).
Uvs130414-011
Colour the centre of the flower (avoiding the stamens) - I used V09, you can pick any of the colours to be your centre colour.
Uvs130414-011
Then colour the remaining layers of petals, with the same colour - only add this colour to the to the inner part of each petal.  Your flower should look like this.
Uvs130414-011
Add your second colour next to the first, overlapping a little - making sure to leave white space on each petal for your third and final colour.  Add this second colour to all petals, your flower should now look like this. Uvs130414-011
Add the third and final colour to remaining white areas of flower, overlapping the third colour over the second colour - you are not trying to blend here.
Uvs130414-011
You should now have something like this and you are ready to add Colorless Blender fluid all over the flower - make sure you have thoroughly wet all petals so that the colours mix and blend.  For this flower you do not need to drip blender onto edges, just wet the flower all over so that the colours blend together.Uvs130414-011
Dry flower with heat gun / embossing gun as this produces best results.
Uvs130414-011
Add a little stickles to the edges of each petal and leave to dry.
Uvs130414-011
 When dry your flower will look similar to this
 
You can watch this flower being created here:

 

Flower #3 - Bling-It-Up Copic Flowers

These flowers build on the basic techniques from Flower #1 and Flower #2 and add a little (or a lot) of bling to ramp up the wow factor! Depending on your flower choice (flat or dimensional) will decide how many colours you can use to create the copic colour of your flower.  For smaller flowers fewer colours are best, on larger flowers you can use 3 or more colours.

For these flowers you will need:
  • Mulberry Paper Flower
  • 2 or 3 Copic Markers
  • Colorless Blender Various Ink Refill
  • X-Press It Clear Gel Glue
  • Heat Gun /Embossing Gun
  • Lindy's Stamp Gang Starburst Spray (I used Creme Brulee Cream) or Glitz Spritz (I used Royal Amethyst Fire) you could also use the Perfect Pearls Mist from Ranger
  • Gala Glitz in White
Instructions:
  1. Begin with flower of your choice, flat (like a gardenia) or dimensional (like a rose).  
  2. Choose colours of Copic Markers to add to your flower - for a realistic effect perhaps choose colours from a natural blending family or colours that may exist in nature, or go for a wild combination of fantasy colours - the choice is yours.  
  3. Apply colour to flower in one of the methods described above.
  4. Add Colorless Blending solution to blend and soften colours, then dry with a heat gun.   
It's at this point you add the bling - building on our previously learned techniques.  For each of the following flowers you need to have completed steps 1 to 4.

Example: Shimmer Flower
Copic colours used on this flower BV11 &BV17
After completing steps 1 to 4 spray entire flower with a pale or colourless shimmer spray (I used Starburst Sprays), and dry with heat gun / embossing gun, for a result that looks like this:

Example: Bling Flower
Copic Colours used on this flower YR15 & R39
After completing steps 1 to 4 add Clear Gel Glue to tips of lower petals and sprinkle Gala Glitz over top.  Carefully turn flower upside down and tap to remove excess product and then allow glue to dry completely before use.  DO NOT dry with a heat gun as this can cause your glue to bubble or embellishments to melt.  This gives a result that looks like this:

Example: Shimmer & Bling Flower
Copic colours used on this flower BG13 & BV13
After completing steps 1 to 4  spray entire flower with a pale or colourless shimmer spray (you could even use more than one colour of spray), then add Clear Gel Glue to tips of lower petals and sprinkle Gala Glitz over top.  Carefully turn flower upside down and tap to remove excess product and then allow glue to dry completely before use.   You can also apply these 'bling' techniques to the flatter gardenias and similar flowers. This gives a result that looks like this:


You can watch these flowers being created here:

I hope this has inspired you to pull out some of those unused paper flowers in your stash and colour them up using your Copic markers.  Why not show us what you have created on the Copic Oz Facebook page.

May your day sparkle,
KatePin It

8 comments:

  1. Stunning Kate, I love colouring flowers and it was great to see your approach to these bursts of colour, I am sure everyone will be reaching into their stash for blooms to transform!!

    ReplyDelete
  2. Gorgeous flowers! Thanks for the tutorial! I seem to collect flowers but never use them. Now maybe I will~TFS

    ReplyDelete
  3. Thanks ladies - I'm hoping to see masses of Copic coloured flowers out there on projects very soon :O)

    ReplyDelete
  4. Thankyou for sharing, great ideas and easy to follow instructions!!! the flowers are just divine! XOX Tania

    ReplyDelete
  5. Stunning Kate!!! Love the gorgeous colours you've created with these flowers!!

    ReplyDelete
  6. Thanks for the great tutorial, love these copic flowers.

    ReplyDelete