Easy Typography for your Copic Projects

Today I'm going to let you in on a little secret - my lettering isn't always what I'd like it to be, so I CHEAT.  So in an effort to help all those other typographically challenged people out there, I'm going to share my secret formula for creating beautiful lettering on your cards, journals or scrapbook pages.

Two reliable ways to create beautiful typography:

1. Use Word (or similar program) to create desired lettering, choose a outline only font, print this in very light grey using a laser printer.  You can trace straight over this printed word with Copics and if you are neat, no one will ever know you didn't write this yourself!
   NB: test your printer ink to make sure it is Copic safe before trying this, all laser printers are Copic Safe, only some ink jet printers have Copic safe ink.  For information on how to test your ink read this post.
2. You learned this second method in Elementary/Primary School.  Print the word onto paper, flip the paper over and scribble on the back very heavily in soft lead pencil (eg: 2B), turn the paper back over place it over your project and then trace over the word - this transfers the carbon/graphite from the pencil creating a copy onto your card or page.
   NB: Only one thing you need to know here, tracing over pencil with Copic makes the pencil permanent - you can't rub it out later!  So this works best if outlining with black or dark coloured Copics that will hide the pencil lines.

I used the pencil trace method for the lettering on this project, as I knew I would be using black, which would hide the pencil lines.

For today's project, I will be printing directly onto my X-Press It Blending card and tracing over the printed text.

What I Used:

• Copic Multi Liners: 0.3 Black, Turquoise, Pink, BS Cool Gray (Brush Tip)
• Copic Marker: RV09, BG32 & BG49
• AtYou Spica: Turquoise & Pink
• XPress It Blending Card
• Font - Victorian LET

Begin by tracing over your printed outline with a black Copic Multi Liner - I used 0.3

Using your favourite coloured Copic Multi Liners add a little doodling, I started with Turquoise.

Then add a little pink, leaving quite a bit of white space.

Swap to some of those yummy sparkly Spica pens and add a little more doodling.

Finish by adding simple dots to fill the remaining white space - don't make all of your marks doodles, keep some marks simple so your design doesn't look too busy.

To make your design pop off the page,  edge your letters using a cool grey - I used the Copic Brush Tip Multi Liner for this as it has a wondeful precision tip.

To complete my card I needed some ribbon, sadly I didn't have a colour to match the Turquoise, so Copics to the rescue!  I coloured some white ric-rac with my Copic Marker BG32.

I had the same problem with the glitter on my tree, so once again I used my Copic Markers in RV09 & BG49 to recolour the glitter elements on my embellishment.

When you put it all together the finished Christmas card looks like this.

I hope this post has given you a few ideas about how you could incorporate Copics into your Christmas cards and create beautiful lettering on your Copic projects!

Back with more next year and wishing you all a very Merry Christmas!

Kate