Marbled Backgrounds with Copic Various Inks

Hi All - this week I'm going to share something fun that you could even get the kids involved with if you want to!  Though I must warn you, once you start playing this can be a little addictive, and it only gets worse once you realise all the things you can use it on!  I'm talking about marbling with Copic Various Inks of course :)

To try this for yourself you will need:

• shaving foam (the cheaper the better) 
• a flat surface, tray or dish that is longer than the object you'd like to colour
• 3 or 4 colours of Copic Various ink, I used: BG15, BG34, BG49 and YG07
• a palette knife, spatula, and maybe a toothpick 
• and if you'd like to include a little luxury a pearlescent or metallic ink, I used Silver iZink
• things to marble, paper, card etc.

 Spread the shaving foam onto a flat surface using a credit card or palette knife, I make sure mine is about 3cm thick so I can make a few different marbled items.  Once the surface is relatively flat, drip the various ink on top, making sure to keep each drop separate.  I like to use only 3 - 4 colours at once or you run the risk of making mud - my most successful patterns have either been all cool colours or all warm colours, BUT if you are careful you could use all the colours of the rainbow - you just won't be able to make as many prints.  

You can add a few drops of metallic or pearlescent ink for a luxury look,

a few drops = delicate swirls of metallics, lots of drops = pure luxury!  I just added a few.

The Various ink will eat into the foam a little, don't worry this won't be a problem.

Using the tip of a palette knife or a toothpick, draw parallel lines through the shaving foam.  Then rotate your project 45 degrees and repeat the process, keep rotating your project and drawing parallel lines through the foam until you have a pleasing pattern.

Place your cardstock onto the surface of the foam and lightly press down with your fingers, you need to make sure that all of the card makes contact with the foam or you will have blank spots on your design.  Some of the foam may squash around on to the back of your page - don't worry, just wipe it off later.

Gently peel the card from the surface of the shaving foam - don't worry this isn't the design that will be on your card.

Place your paper foam up onto some newspaper and use a paper towel to gently wipe to foam off the paper, I've also tried a spatula to remove the foam, but it can damage the paper surface and drag colour across the design - so I prefer a paper towel.  This step is really messy so be careful.  Once the shaving cream is removed, the design printed onto your paper will be revealed, the FIRST print will look something like this, notice the white space and clean lines.

Now if the pulled pattern left in the foam looks really pretty like this one, then grab another piece of paper (or your journal) and place it onto the foam - no need to waste it, and yes I've placed a double page journal into the foam - messy but so pretty!

Your print may look something like this, wouldn't this be an amazing and unique background for a scrapbook layout, page or a card.

Hmm - there is still a LOT of shaving cream and ink - I like to draw more lines add a little more ink and create a 2nd generation marbled print - notice this one has less white space and the pattern isn't as crisp, the lines are all softer and this second print has more of a watercolour appearance - still beautiful though!

To be honest I just keep dipping pages into the ink until either the ink or the shaving cream run out, it's messy, fun, unpredictable and completely addictive.

Wondering what else you could use this on?  Following is a brief list of things I've marbled:

• journal pages
• scrapbook pages
• card backgrounds
• chipboard letters (this looks AMAZING!)
• ribbon - oooh this looks yummy
• doilies
• Easter eggs
• notepaper
• envelopes
• handkerchiefs - though this was a bad idea as it's so pretty I've never used it!

I hope you've enjoyed this tutorial on marbling with Copic Various inks - if you have felt inspired to give this a go we would love to see your results over on the FaceBook page.

Back with more soon,
Kate

Back to Basics

Hello Everyone and welcome back to another Copic Oz Tutorial!  Today we are going Back to Basics!  For many of us, it seems such a long time ago that we ventured into the Copic Universe, but we have to remember that many have only just started on their journey, so for those beginners - this one is for you!!

Let's start at the beginning - did you know there are now 358 Copic Colours!!!  I know - awesome right!!  :)  There are FOUR styles of Copic Markers - Original (square body), Sketch (oval body), Ciao (round body) and Wide (short, wide body).  Most of the Papercraft Tutorials that you'll find online or in stores will use the Sketch and Ciao markers - both of these use the Super Brush Nibs which are perfect for blending!  The main difference between these two marker types is that the Sketch comes in ALL 358 Colours, you can airbrush with it, it's a little more expensive because it holds 40% more ink than the Ciao.  The Ciao come in 180 Colours and isn't designed to fit the airbrush system.  You CAN absolutely have both types in your collection and use both at the same time as the inks are the same.  I have a collection of both!

Sooooo......how do you choose colours??  A good starting point is the Copic Colour Wheel!  You can download your free copy of the Copic Colour Wheel from the Copic Marker Australia Library - or simply CLICK HERE!  The Colour Wheel has all the colours on it, grouped in Colour Families (Blue, Blue-Violet, Violet, Red-Violet, Red, Yellow-Red, Yellow, Yellow-Green, Green, Blue-Green, Earth, Cool Grey, Neutral Grey, Toner Grey, Warm Grey.).

When you look at your markers you'll see a number - for example B00.  If you look at your Colour Wheel you'll see that the B stands for the Blue Colour Family.  The first NUMBER (0) tells you how vibrant or saturated the colour is.  The second NUMBER (0) tells you how light or dark the shade is.

Here's an example of a Natural Blending Pair.  That is, two colours with the same letter, same first number and the second number 2 - 4 digits apart.  In this example I've used B00 and B02.  When you look at a Colour Wheel, these colours will be on the same track that goes around the wheel.

Now I'm sure you've seen that usually as people become more confident with their Copics, they use more than two colours.  A natural blending partner for the above two markers is B05, because it is 2 - 4 digits apart from B02.  You can see in the example that the vibrancy of the colours is the same, but the shade gets darker.  This will still be on the same track of the colour wheel.

So what happens if you change the first number instead of the second number?  In that case, you are changing the saturation/vibrancy of the colour.  Below I have B05, B45 and B95 (all ending in 5), however look how much more GREY the colour becomes as you change that first number?!  These colours will be on different tracks on the colour wheel - the greyer it becomes the closer it moves to the centre of the wheel.

Disclaimer - the E Family (Earth) doesn't follow this rule with the first number - it does with the second number rule though.  Earth is that rebel in the family.....you know what I mean, we all have one don't we!  ;-)

So, lets colour!  This sweet image is called Wendy's Bouquet by CandiBean and I've started colouring her dress in the example colours above, beginning with B00.  When starting to colour, I always lay down the LIGHTEST colour first - this is like priming you paper ready for blending.

Next I've started shading with B02.

Notice I've flicked in the darker colour from the sides?  Usually people only talk about the 'flicking' style when talking about Feather Blending, but this is a really good habit to get into as those trailing edges are *SO* much easier to blend than hard, blunt edges.  Your flicking should use the SIDE of your brush nib and have a trailing edge like the bottom example, not hard lines like the upper ones.

After you've flicked in your darker colour of your pair, go back and LIGHTLY blend with the lighter colour where the two colours meet.  In this case, it's B00.

If you want to try 3 or more colours, the same basic principle applies, follow the steps above and then add the darker B05 for your shading.

Then once again blend when your NEXT lightest colour - in this case B02.

Then blend again with the next lightest colour - B00 in this case.

You image should now have much more contrast and depth of colour!  For basic blending on skin, I've used E000 as my base colour.  Once again, lightest colour first to 'prime' your paper for blending.

Next I've used E01 (E000 and E01 are within the 2-4 digits apart for basic blending pairs) and flicked this colour in from the sides and under the fringe.

Very lightly blend these colours together along the edges where they meet with E00 (the lightest colour).

If you want to really step up your skin colours once you've had a little practice with basics, have a look at the advanced skin tutorial that can be found HERE!

Finish colouring your image in what ever colours you like!!

The colours I used are....
Dress - B00, B02, B05; YG21, YG23
Hair - YR20, YR21, E33, E17 (I know, completely breaking the rules!  Intermediate rules!)
Shoes - E13, E17
Cat - E11, E13 (RV000 for ears and nose)
Bow - Y11, Y15, Y17
Roses - Y21, Y35, Y38
Leaves and Stems - G43, G46 (Eeep - missed two leaves!  Sorry, imagine they are coloured!!)

That's all from me today, I hope you've enjoyed today's tutorial!!  Have you heard that we are looking for designers to join the Copic Oz/Xpress It design team??  We are an Australian based team, so this is a call for Aussies only (sorry to our international fans) - want to know more??  CLICK HERE!

Happy Colouring!
Kathy  :)

Would you like to join the Copic Oz Design Team?!

 

 We are so excited to announce that we are looking for some talented new crafters to join our family of blogs! If you are a talented papercrafter, scrapbooker, card maker, mixed media artist or anything in between – then we want to hear from you! 

 

To find out how to apply please visit The Inspiration Lane Blog!